What is recorded and measured by the Ergomo computer?

• Power in Watts- updated every one second on the screen based on an eight
  rpm rolling average.
• Heart Rate
• Cadence- updated every one second on the screen based on an eight rpm rolling average.
• Speed in KPH & MPH.
• 11 hours of recordable ride time on the computer.

Currently, the Ergomo records data every 5 seconds. The Ergomo takes between 72 and 144 measurements per 1 rpm, averages this number over the amount of rpm's per second and saves it. Every second a sample is taken and then 5 seconds (samples) are averaged and this is the number that is recorded in the computer for download. For example: 300w, 300w, 300w, 305w, 310w, will be taken by the computer and the average of these will be recorded= 303watts.

Features that you can see while riding.

• Speed, Watts, Heart Rate (HR) and cadence all on one display
• Trip Distance
• Average HR, cadence, watts, speed
• Max HR, Cadence, Watts, speed
• Cumulative Distance
• K/cal and cumulative k/cal
• Time and a trip clock
• Temperature

The Battery in the computer is rechargeable and lasts approximately 30 hours of riding time, before needing a re-charge. The re-charge will take approximately 2-3hours.

The battery life span is 500 re-charge cycles minimum, so weekly re-charging would give a 10year battery life. Once the low battery ‘warning’ indicator is on your Ergomo, you have approximately 2-4 hours of riding/recording time left.

There is no battery in the sensor.